Skip to main content
SugarPixel+ does not officially support Eversense sensors. However, some users have successfully connected SugarPixel+ by uploading Eversense data to Nightscout or Gluroo.
Important
  • These steps are Android only
  • This is a community-provided workaround
  • Setup should be tested before ordering SugarPixel+
  • We may not be able to provide full support for issues related to this configuration
1

Install an Eversense Uploader App

You must install an app that can read Eversense data and upload it to Nightscout. Nightscout maintains a list of supported uploaders:https://nightscout.github.io/uploader/uploaders/#eversenseBefore continuing, confirm the uploader app is actively receiving glucose readings.
2

Set Up Nightscout or Gluroo

Option A: Nightscout — If you already have a Nightscout site, configure the uploader app to upload to it using the format: https://YourToken@YourUrl/api/v1. Then select Nightscout in SugarPixel+ and enter the same URL and Token.Option B: Gluroo (Free) — Install the Gluroo app, skip syncing to a CGM during setup, then go to Devices → Other and copy the Gluroo Global Connect URL and API Secret. Use this as the upload destination in your Eversense uploader app, then enter the same URL and Token into SugarPixel+.
3

Configure SugarPixel+

In SugarPixel+‘s CGM setup, select Nightscout or Gluroo and enter the same URL and API Secret / Token used for uploads. Only complete this step after you confirm real-time glucose readings are visible in Nightscout or the Gluroo app.

​
Troubleshooting

Display Stuck on “Starting Up”