Skip to main content
SugarPixel+ does not officially support MiniMed CGMs. However, users have successfully connected SugarPixel+ by syncing MiniMed data through CareLink and uploading it to Nightscout or Gluroo. This approach has been reported to work with Guardian, Simplera, and Instinct sensors, as long as data is available through MiniMed CareLink.
Important
  • This is a community-provided workaround
  • Setup should be tested before ordering SugarPixel+
  • We may not be able to provide full support for issues related to this configuration
Justin from Diabetech created a step-by-step video showing how to sync MiniMed CGM data to Nightscout or Gluroo, which SugarPixel+ can then use. Subscribe to his channel for more diabetes tips and tricks.
1

Install an App to Read CGM Data

Android (xDrip+)
  • Install xDrip+ from: https://jamorham.github.io/#xdrip-plus
  • xDrip+ is not in the Play Store and requires allowing apps from unknown sources
  • Install xDrip+ on the same phone as the MiniMed app
  • Configure xDrip+ using Companion Mode following the xDrip documentation
iPhone (Guardian Monitor)
  • Install Guardian Monitor from the App Store
  • Follow the app’s setup instructions
  • A subscription is required to upload glucose data
  • Guardian Monitor can upload readings to Nightscout
2

Set Up Nightscout or Gluroo

SugarPixel+ cannot connect directly to MiniMed or CareLink. Data must be uploaded first.
  • If you already use Nightscout, configure xDrip+ or Guardian Monitor to upload to your Nightscout site
  • If you do not have Nightscout, install the Gluroo app (free), skip CGM sync during setup, then go to Devices → Other and use the Gluroo Global Connect details for uploads
3

Configure SugarPixel+

In SugarPixel+‘s CGM setup, select Nightscout or Gluroo and enter the same URL and API Secret / Token used for uploads. Only complete this step after you confirm real-time readings are visible in your Nightscout site or the Gluroo app.

​
Troubleshooting

Display Stuck on “Starting Up”