Skip to main content
SugarPixel Mini/Classic supports Libre sensors that provide automatic, real-time readings through LibreLinkUp. If your sensor requires manual scanning, see Libre FGM (Manual Scan).
Omnipod 5 users: If you use Omnipod 5 with a Libre CGM in a supported country, link your Omnipod account to LibreView via your country’s Omnipod website, then follow the steps below.
1

Set up LibreLinkUp following

In the Libre app, go to Connected Apps → LibreLinkUp and add at least one follower. If you don’t want others following you, invite yourself using a different email address.
2

Confirm readings in the LibreLinkUp app

Install the LibreLinkUp app, log in with your follower account, and confirm glucose readings are visible.
3

Enter your LibreLinkUp login in SugarPixel Mini/Classic

Tap Libre and enter the LibreLinkUp email and LibreLinkUp password — not your main Libre account. Tap Test Connection, check the reading against the LibreLinkUp app and tap Yes, save it. SugarPixel Mini/Classic will display “DOWNLOAD” and begin showing readings.
Finding your LibreLinkUp login: The LibreLinkUp email SugarPixel is using is shown on the CGM screen in the SugarPixel app. The LibreLinkUp app shows the email you’re logged in with on its Account screen. Passwords aren’t shown anywhere. If you’re not sure of the password, reset it from the LibreLinkUp app’s login screen, then enter it again in SugarPixel.

Troubleshooting

Libre LinkUp: No Data or Hourglass Icon

Libre LinkUp: SugarPixel Mini/Classic Displays “Accept Libre Terms”

Libre LinkUp: Still No Data? Send These Screenshots